==================================================================
======================== UPDATE PROCEDURE ========================
==================================================================

To update your Bishop’s Miscellany MK2, remove the SD card and
copy the .bin file to its root. Insert the card back in and
power up the module while holding the PROCESS button. The screen 
will guide you through the procedure. When the Bishop’s asks you 
to power-cycle the module, please wait 10 seconds before 
turning it off and back on.



==================================================================
========================= FIRMWARE 1.1.0 =========================
==================================================================
------------------------------------------------------------------
BUG FIXES
------------------------------------------------------------------

ACV 
-> Negative ACVs were ignored for certain assignments 
-> ACVs in Process mode could behave inconsistently
-> fixed ACVs target value that would sum when switching channels

(RE)GEN 
-> Fixed various issues affecting Random, Range, Path, and Arp
   algorithms
-> Fixed bug that caused a module freeze in (RE)GEN page

QUANTIZER 
-> The Quantizer was deactivated when ACV Activity and Run
   were selected and their inputs received an inactive signal (e.g. 0V)

------------------------------------------------------------------
IMPROVEMENTS
------------------------------------------------------------------

QUANTIZER 
-> New factory scales added : Harmonic Major, Harmonic Minor, and
   Six-Tone Symmetrical.
-> Added support for custom user scales stored on the SD card.

(RE)GEN 
-> New Regen algorithm: Xtalk 
-> Improved potentiometer mapping
   across several (Re)Gen algorithms 
-> Various enhancements to the Speed,
   Slice, and Arp algorithms
-> Random1 and Random2 now use the same octave 
   as other GEN algorithms instead of an octave above

MEMORY 
-> UI improvements: channel switching using the channel buttons,
   and automatic selection of the current playlist (instead of defaulting to Playlist 1)
-> Now loads the last used project on startup
-> Saved or loaded sequence now display correct number when above 256.

LISTEN MODE 
-> Exiting Listen Mode no longer engages recording.

FAST SCROLLING WHEN SAVING PATTERN ON MEMORY PAGE
-> Fast scrolling implementation when scrolling and holding 
   the encoder pushed. 


==================================================================
========================= FIRMWARE 1.0.2 =========================
==================================================================

Adds a residual offset compensation on outputs and inputs.




==================================================================
========================= FIRMWARE 1.0.1 =========================
==================================================================
------------------------------------------------------------------
BUG FIXES
------------------------------------------------------------------

-> Clock dividers buggy with some divisions.
-> Select Bus messages reception.
-> Reset input skipping triggers.
-> Some minor bugs regarding the Delay and Arpeggiator algorithms, 
   from the (Re)Gen section.

